This is a 2.13 inch e-paper screen with 250x122 resolution, SPI interface, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEM0213U23 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
Relevant manual about this product , contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
|
PART NUMBER |
GDEM0213U23 |
||
|
TYPE |
Dot Matrix |
OPRATING TEMP. | 0℃~25℃ |
|
RESOLUTION |
250x122 |
STORAGE TEMP. | -25℃~70℃ |
|
OUTLINE SIZE(mm) |
29.2x59.2x1.05 |
CONNECTOR | 24 Pin FPC |
|
ACTIVE SIZE(mm) |
23.67x48.50 |
MAX GRAYSCALE | 2 |
|
PIXEL PITCH(mm) |
0.194x0.194 |
COLOR | Black,White,Red |
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-C03 (Rasberry Pi Epaper HAT)
USD
