TIP: GDEW029T5D E Ink display has been discontinued, and its replacement is GDEY029T94.
This is a 2.9 inch e-paper with 296x128 resolution, SPI interface, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This 2.9 inch e-paper GDEW029T5D is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this 2.9 inch e-paper on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
|
PART NUMBER |
GDEW029T5D |
||
|
SIZE |
2.9 inch |
CONNECTOR | 24 Pin FPC |
|
TYPE |
Dot Matrix |
MAX GRAYSCALE | 4 |
|
IC |
UC8151D |
COLOR | Black, White |
|
RESOLUTION |
296x128 |
INTERFACE | SPI |
|
OUTLINE SIZE(mm) |
79x36.7x1.18 |
FULL REFRESH(s) | 3 |
|
ACTIVE SIZE(mm) |
66.9x29.06 |
PARTIAL REFRESH RATE(s) | 0.3 |
|
PIXEL PITCH(mm) |
0.227x0.226 |
POWER CONSUMPTION OF THE REFRESH(mW) | 26.4 |
|
OPERATING TEMP. |
0℃~50℃ |
STANDBY POWER CONSUMPTION (mW) | 0.0165 |
|
STORAGE TEMP. |
-25℃~70℃ |
||
● Support 4 Grayscale
● Black and white monochrome is easy to read.
● Versatile. Use in portrait or landscape format.
● Bistable. (Will continue to display with no power source)
● Support partial refresh. The partial refresh rate is 0.3s/frame
● I2C Signal Master Interface to read external temperature sensor.
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
\
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-C03 (Rasberry Pi Epaper HAT)
USD
