Any questions, just feel free to contact me, my email is: info@good-display.com
☆ INTRODUCTION
This is a 1.02 inch Mini Flexible E-ink Display Electronic Paper Screen use the flexible substrate as base plate, with 128x80 resolution, SPI interface, the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-ink display GDEW0102I4FC is perfect for low power devices powered by solar or batteries.
Usually, the electronic paper screen is mostly plugged into the FPC, but this 1.02 inch e-ink display GDEW0102I4FC is a ACF Thermal Compression bonding method, and the gold finger of the FPC is facing down when the display side is facing up. We can offer the adapter board for test.
Relevant manual about this product on our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
* It CAN NOT be tested with DESPI-C102
☆ THE ABOVE PRICE INCLUDE
1) 1.02 inch Mini Flexible E-ink Display 128x80 Electronic Paper Screen * 1pc
☆ MAIN PARAMETERS
|
PART NUMBER
|
GDEW0102I4FC
|
|
|
TYPE
|
Dot Matrix
|
STORAGE TEMP. |
-25℃~70℃ |
|
SIZE
|
1.02 inch
|
CONNECTOR |
30 Pin |
|
IC
|
UC8175
|
MAX GRAYSCALE |
2 |
|
RESOLUTION
|
128x80
|
COLOR |
Black,White |
|
OUTLINE SIZE(mm)
|
32.57x18.6x0.3
|
INTERFACE |
SPI |
|
ACTIVE SIZE(mm)
|
21.76x14
|
FULL REFRESH(s) |
3 |
|
PIXEL PITCH(mm)
|
0.175x0.17
|
PARTIAL REFRESH TIME(s) |
0.3 |
|
OPERATING TEMP.
|
0℃~50℃
|
FEATURE |
Flexible |
☆ DETAILS
☆ FEATURE
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports small bending because its flexible feature
● It supports partial refresh, the refresh rate is 0.3s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
☆ 1.02'' E-INK DISPLAY
|
Part Number
|
Color
|
IC
|
Resolution
|
Features
|
Refresh Time
|
|
GDEW0102T4
|
B/W
|
UC8175
|
128x80
|
Partial refresh 0.3s/frame
|
3s
|
|
GDEW0102I3F
|
B/W
|
UC8175
|
128x80
|
Flexible, Partial refresh 0.3s/frame
|
3s
|
|
GDEW0102I4FC
|
B/W
|
UC8175
|
128x80
|
Flexible, Partial refresh 0.3s/frame
|
3s
|
☆ ABOUT US
Please feel free to contact us for any questions, on trademanager, or send message to me. It's our pleasure to serve you! We appreciate your business!!
My email is: info@good-display.com
USD
