Any questions, just feel free to contact me, my email is: info@good-display.com
☆ INTRODUCTION
This is a set of E-PAPER HAT with 1.54 inch e-paper display with 200x200 resolution, SPI interface, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-ink display GDEH0154D67 is perfect for low power devices powered by solar or batteries.
This connection board DESPI-C02 used for Good Display's black-white E-paper Display and three-color (black, white and red/Yellow)
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on our official website (www.good-display.com), contact us please.
Use our free e-paper software to prepare your bitmap image for this display.
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports partial refresh, the refresh rate is 0.3s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
1) 1.54 inch small eink display for support partial update GDEH0154D67 * 1pc
2) Connector board DESPI-C02 * 1pc
3) FPC Connector * 1pc
4) Example code and Manual * 1pc. (Please advise email ID along with order,so that we can send them.)
|
PART NUMBER |
GDEH0154D67 |
|
TYPE |
Dot Matrix |
|
SIZE |
1.54 inch |
|
IC |
SSD1681 |
|
RESOLUTION |
200x200 |
|
OUTLINE SIZE(mm) |
31.8x37.32x1.05 |
|
ACTIVE SIZE(mm) |
27x27 |
|
PIXEL PITCH(mm) |
0.135x0.135 |
|
OPERATING TEMP. |
0℃~50℃ |
|
STORAGE TEMP. |
-25℃~60℃ |
|
CONNECTOR |
24 Pin FPC |
|
MAX GRAYSCALE |
4 |
|
COLOR |
Black,White |
|
INTERFACE |
SPI |
|
FULL REFRESH(s) |
2 |
|
PARTIAL REFRESH TIME(s) |
0.26 |
|
POWER CONSUMPTION OF THE REFRESH(mW) |
4.95 |
|
STANDBY POWER CONSUMPTION (mW) |
0.006 |
|
PART NUMBER |
DESPI-C02 |
|
PLATFORM |
STM32 |
|
FUNCTION |
Connection E-paper Display with Drive Board |
|
OUTSIDE DIMENSION |
41x22mm |
|
INTERFACE |
SPI |
|
POWER INPUT |
DC3.3V |
|
FEATURE |
Fully and Partial Refresh |
|
OPERATING TEMP. |
-20℃~70℃ |
1) GDEH0154D67 Specification
2) IC Driver SSD1681 Datasheet
3) GDEH0154D67 Bitmap Conversion
4) GDEH0154D67 STM32 Sample Code
5) GDEH0154D67 Arduino Sample Code
6) GDEH0154D67 Raspberry Pi Sample Code
7) GDEH0154D67 ESP8266 Sample Code
8) GDEH0154D67 ESP32 Sample Code
☆ OTHER PRODUCTS
|
Part Number |
Color |
Resolution |
Features |
Refresh Time |
|
BW |
200x200 |
SSD1681, Partial Refresh, With Frontlight |
2s |
|
|
BW |
152x152 |
JD79653, Fast Refresh, Partial Refresh |
0.82s |
|
|
BW |
152x152 |
UC8151D, DES, High contrast |
3s |
|
|
BW |
152x152 |
UC8151C, Fast Refresh, Partial Refresh, With Frontlight |
0.82s |
|
|
BW |
152x152 |
UC8151D, Fast Refresh, Partial Refresh |
0.82s |
|
|
BWR |
200x200 |
SSD1681, Colorful(Red) |
15s |
☆ ABOUT US
Please feel free to contact us for any questions, on trademanager, or send message to me. It's our pleasure to serve you! We appreciate your business!!
My email is: info@good-display.com
USD
