☆ INTRODUCTION
This is a 1.54 inch color epaper small e-ink, 200x200 resolution, SPI interface,Fast refresh for 1.5s and the color e-paper display is capable to display images with black, white and red content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-ink screen modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This tri-color epaper screen display GDEY0154Z90 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
* This e-ink display module DOES NOT support partial updates.
☆ THE ABOVE PRICE INCLUDE
1) 1.54 inch tri-color Epaper E-ink Display 200x200 SPI Screen, GDEY0154Z90 * 1pc
2) FPC Connector * 1pc
☆ MAIN PARAMETERS
|
PART NUMBER
|
GDEY0154Z90
|
|
TYPE
|
Dot Matrix
|
STORAGE TEMP. |
-25℃~60℃ |
|
SIZE
|
1.54 inch
|
CONNECTOR |
24 Pin FPC |
|
IC
|
SSD1681
|
MAX GRAYSCALE |
2 |
|
RESOLUTION
|
200x200
|
COLOR |
Black, White, Red |
|
OUTLINE SIZE(mm)
|
37.32x31.80x0.98
|
INTERFACE |
SPI |
|
ACTIVE SIZE(mm)
|
27x27
|
FULL REFRESH(s) |
16 |
|
PIXEL PITCH(mm)
|
0.14x0.14
|
POWER CONSUMPTION OF THE REFRESH(mW) |
7.5 |
|
OPERATING TEMP.
|
0℃~40℃
|
STANDBY POWER CONSUMPTION (mW) |
0.003 |
☆ FEATURE
● Versatile. Use in portrait or landscape format
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Black, white and red. Compared with monochrome electronic paper display, it is more beautiful
● It enable a greater contrast ratio and wider viewing angle with high reflectance compared to liquid crystal displays
● Development platform available STM32 / Arduino / ESP8266 / ESP32
☆ DETAILS
☆ MATCHED DEVELOPMENT KIT
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP8266-L(C02) (WiFi)
● ESP32-L(C02) (WiFi / Bluetooth)
☆ RELATED INFORMATION DOWNLOAD
● GDEY0154Z90 Specification
● IC Driver SSD1681
● GDEY0154Z90 STM32 Sample Code
● GDEY0154Z90 Arduino Sample Code
● GDEY0154Z90 ESP8266 Sample Code
● GDEY0154Z90 ESP32 Sample Code
☆ WE ALSO SUGGEST...
☆ ABOUT US
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].
USD
