☆ INTRODUCTION
This is a 2.7 inch small e-ink display with 264x176 resolution, SPI interface, and the display is capable to display images with black and white content. It supports 3s full refresh, 1.5s fast refresh and 0.42s partial refresh. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper display GDEW027T91 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
☆ THE ABOVE PRICE INCLUDE
1) 2.7 inch E-Paper 264x176 Resolution Eink Display Communicating via SPI Interface * 1pc
2) FPC Connector * 1pc
☆ MAIN PARAMETERS
|
PART NUMBER
|
GDEY027T91
|
|
|
TYPE
|
Dot Matrix
|
CONNECTOR |
24 Pin FPC |
|
SIZE
|
2.7 inch
|
MAX GRAYSCALE |
4 |
|
IC
|
SSD1680
|
COLOR |
Black,White |
|
RESOLUTION
|
264x176
|
INTERFACE |
SPI |
|
OUTLINE SIZE(mm)
|
70.42x45.8x1.0
|
FULL REFRESH(s) |
3 |
|
ACTIVE SIZE(mm)
|
57.29x38.19
|
FAST REFRESH(s) |
1.5 |
|
PIXEL PITCH(mm)
|
0.217x0.217
|
PARTIAL REFRESH TIME(s) |
0.42 |
|
OPERATING TEMP.
|
0℃~50℃
|
POWER CONSUMPTION OF THE REFRESH(mW) |
9 |
|
STORAGE TEMP.
|
-25℃~70℃
|
STANDBY POWER CONSUMPTION (mW) |
0.003 |
☆ FEATURE
● Support 4 Grayscale
● Support 1.5s fast refresh
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● It supports partial refresh, the refresh rate is 0.42s/frame
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● It enable a greater contrast ratio and wider viewing angle with high reflectance compared to liquid crystal displays
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
☆ MATCHED DEVELOPMENT KIT
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP8266-L(C02) (WiFi)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-C03 (Rasberry Pi Epaper HAT)
☆ DETAILS
☆ WE ALSO SUGGEST...
USD
