☆ INTRODUCTION
This is a 4.26 inch e-ink screen with 800x480resolution, SPI interface, supports 4s full screen update, 1s partial screen update, 0.76s fast update, and the display is capable to display images with black and white content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these E Ink modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-ink display GDEQ0426T82 is perfect for low power devices powered by solar or batteries, such as electronic epaper price tag.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
☆ THE ABOVE PRICE INCLUDE
1) 4.26 inch e-paper display Morochrome SPI e-ink GDEQ0426T82 * 1pc
2) FPC Connector * 1pc
☆ MAIN PARAMETERS
| Part Number |
GDEQ0426T82 |
| Size |
4.26 inch |
| IC |
SSD1677 |
| Type |
Dot Matrix |
| Resolution |
800*480 |
| Outline Size(mm) |
105.33*62.37*0.926 |
| Active Size(mm) |
92.8*55.68 |
| Pixel Pitch(mm) |
0.116*0.116 |
| Operating Temp. |
0℃~50℃ |
| Storage Temp. |
-25℃~60℃ |
| Connector |
24 Pin FPC, Pitch:0.5mm |
| Color |
Black,White |
| Interface |
SPI |
| Power consumption of the refresh(mW) |
26.4 |
| Standby power consumption Pc(mW) |
0.0066 |
| Partial Refresh Time(s) |
1 |
| Fast Refresh Time(s) |
0.76 |
| Time of refresh(s) |
4 |
☆ FEATURE
● Support 0.76s fast refresh
● Support 1s partial refresh
● Black and white monochrome is easy to read
● Versatile. Use in portrait or landscape format
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● Color Optional. We also have other color for you to choose.
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
☆ DETAILS
☆ MATCHED DEVELOPMENT KIT
● STM32-T01 (E-ink Display HAT)
● DESPI-L(T01) (STM32 Platform/Universal)
● ESP32-T01 (WiFi)
● ESP32-L(T01) (WiFi / Bluetooth)
☆ WE ALSO SUGGEST...
USD
