☆ INTRODUCTION
This is a mini e-paper screen, 0.97 inch, 184x88 resolution, SPI interface, and the display is capable to display images with black and white content. It supports partial refresh, the partial refresh time is 0.3s. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e-paper modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This e-paper GDEW0097T50 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We could provide front light, touch screen and other accessories for you.
Relevant manual about this product on Library or you could go to our official website (www.good-display.com), contact us please.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
PART NUMBER |
GDEW0097T50 |
||
SIZE |
0.97 inch |
CONNECTOR | 24 Pin FPC |
TYPE |
Dot Matrix |
MAX GRAYSCALE | 2 |
IC |
JD79651 |
COLOR | Black, White |
RESOLUTION |
184x88 |
INTERFACE | SPI |
OUTLINE SIZE(mm) |
30.15x14.3x0.98 |
FULL REFRESH(s) | 4 |
ACTIVE SIZE(mm) |
22.264x10.648 |
PARTIAL REFRESH(s) | 0.3 |
PIXEL PITCH(mm) |
0.121x0.121 |
POWER CONSUMPTION OF THE REFRESH(mW) | 26.4 |
OPERATING TEMP. |
0℃~50℃ |
STANDBY POWER CONSUMPTION (mW) | 0.0165 |
STORAGE TEMP. |
-25℃~70℃ |
● Versatile. Use in portrait or landscape format
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor
● This e-paper supports partial update, its partial update time is 0.3s.
● It enable a greater contrast ratio and wider viewing angle with high reflectance compared to liquid crystal displays
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32
● DESPI-C02 (E-ink Display HAT)
● DESPI-L(C02) (STM32 Platform/Universal)
● DEArduino-L(C02) (Arduino Platform)
● ESP32-L(C02) (WiFi / Bluetooth)
● DESPI-PICO (Rasberry Pi Epaper HAT)
● GDEW0097T50 Specification
● IC Datasheet JD79651
● GDEW0097T50 STM32 Sample Code
● GDEW0097T50 ESP32 Sample Code
● GDEW0097T50 ESP8266 Sample Code
● GDEW0097T50 Arduino Sample Code
● Picture Production and Bitmap Convert for GDEW0097T50
● How to choose EPD
● Product Catalog
Thank you for your interest in our product. If you need any further assistance or have any other questions, please feel free to contact us. We sincerely invite you to send your inquiries to our email at [buyepaper@good-display.com].