This is a large epaper e-ink display, 10.2 inch, with 960x640 resolution, SPI interface, and the display is capable to display images with black, white and red content. Your image holds indefinitely without power – put up your image, then shut down the power. Once these e paper display modules are updated they don't require any power and can actually be disconnected entirely and the content will remain on the display indefinitely. This epaper display GDEQ102Z90 is perfect for low power devices powered by solar or batteries.
We provide the E-Ink Adapter Board for you to connect the E-paper Display.
We also could provide front light, touch screen and other accessories for you.
You can refer to the following link for the procedures and instructions of automatic e-paper display bitmap conversion: ImageToEpd. Also you could use our free e-paper software to prepare your bitmap image for this display, or make the picture on our bitmap conversion website: Image to Array
PART NUMBER |
GDEQ102Z90 |
||
TYPE |
Dot Matrix |
STORAGE TEMP. | -25℃~40℃ |
SIZE |
10.2 inch |
CONNECTOR | 24 Pin FPC |
IC |
SSD1677 |
MAX GRAYSCALE | 2 |
RESOLUTION |
960x640 |
COLOR | Black, White, Red |
OUTLINE SIZE(mm) |
224x157x0.912 |
INTERFACE | SPI |
ACTIVE SIZE(mm) |
215.52x143.68 |
FULL REFRESH(s) | 25 |
PIXEL PITCH(mm) |
0.2245x0.2245 |
POWER CONSUMPTION OF THE REFRESH(mW) | 49.5 |
OPERATING TEMP. |
0℃~40℃ |
STANDBY POWER CONSUMPTION (mW) | 0.0066 |
● Versatile. Use in portrait or landscape format.
● Bistable. (Will continue to display with no power source)
● I2C Signal Master Interface to read external temperature sensor.
● Black, white and red. Compared with monochrome electronic paper display, it is more beautiful
● It enable a greater contrast ratio and wider viewing angle with high reflectance compared to liquid crystal displays
● Development platform available STM32 / Arduino/ Raspberry Pi / ESP8266 / ESP32